Dynacord Xa2-PRO Xa4000 Professional PASystem
103
£ 14,499.00
Dynacord Xa2-PRO Xa4000 System Dynacord XA2-PRO System is a quality professional plug and play PA system ideal for Bands, DJ and rental companies
Add Tour Covers (AA Systems) (£226.00)
Qty:
In Stock

Bundle Includes

2 x XA4000
2 x FX12-Pro
4 x FX20-Pro
6 x System Cables
1 x Case for amplifiers

---------

The XA2-PRO System is a professional tool for rental companies to solve tasks which address up to 1000 people or distances up to 50 meters in a very efficient way. Whether on a village fair, smaller open-air festivals, mobile DJ events or within a big marquee, the XA2-PRO is the ideal tool to serve variable applications in an efficient way to the greatest satisfaction of audiences and hosts. The whole system is set up and turn down with little effort and due to the casters it can be very easily transported. The high sensitivity of the transducers provides very high SPL combined with maximum operational safety. The XA2-PRO system’s main features – high sound pressure levels from compact enclosures, extremely convenient handling, and the ultimate sonic performance at a very reasonable price – will continue to be a benchmark. All cabinets have a new heavy-duty structured lacquer surface and a solid-steel front grille matching the latest Dynacord enclosure design.

XA2-PRO – XA4000

The XA2-PRO – XA4000 System is a completely preconfigured, extremely powerful plug and play sound reinforcement system including a system controller. It consists of two XA4000 amplifiers with built-in controllers. Simply set it up, switch it on and off you go!

--------

FX12-PRO

The Dynacord FX12-PRO is a medium longthrow mid/high- frequency cabinet in coaxial design.
It can be used also without subwoofer cabinets in high-quality sound reinforcement system for speech for medium-throw distances. The recommended active x-over frequency is 140 Hz, 18 dB/oct. Butterworth. In the lo-mid range an ND 12 A Electro-Voice loudspeaker chassis works into a conical horn. The 80x40 Constant Directivity horn, driven by an Electro-Voice 1.4" ND 6 neodymium driver delivers the frequency range above 1kHz. The FX12-PRO is equipped with a passive x-over (1kHz, 18 dB/oct). Every transducer is protected against thermal overload with an electronic circuit called voice coil tracking protection. This circuit senses the terminal voltages of the transducers and simulates the thermal behaviour of the tranducers’ voice coils. In case of a potential thermal overload the power applied to the speakers is reduced to a safe level. Power amps up to 1200W 8 Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The voice coil tracking protection exhibits ‘soft’ switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.

Description
Passive mid-high speaker, coaxial conical horn
Nominal impedance 8 Ω
Rated power RMS 350 W
Program power 700 W
SPL 1 W/1 m 106 dB
Maximum SPL (1 meter) 134 dB
Frequency range (-10 dB), measured with Xa 4000 120–19000 Hz
Coverage angle nominal, 1 kHz, -6 dB (measured with Xa 4000) H 80° x V 40°
Crossover frequency 1000 Hz
Recommended active crossover frequency to subwoofer 140 Hz, 18 dB/oct. Butterworth
Voice coil tracking protection
Separate circuits for lo-mid and high
Transducer High frequency ND 6-8/CDH 8040-14
Transducer Low-mid frequency ND 12A
Audio sockets Model 2 x NEUTRIK speakON NL4MPR
Audio sockets Contacts “normal” 1+/1-
Audio sockets Contacts "system" 2+/2-
Enclosure material Birch plywood, 15 mm
Enclosure finish Heavy-duty structured lacquer
Color Black (RAL 9005, jet black)
Grille Powder coated steel with acoustic foam
Handles 2
Webbing strap point 2
Castors 4
Product dimensions (WxHxD) 600 x 610 x 814 mm
Net weight 49.5 kg
Shipping weight 54.6 kg
-------------------------

FX20-PRO

The Dynacord FX20-PRO is a Planar Waveguide Basshorn, equipped with the high-power Electro-Voice EVX 180B 18" transducer.
Frequency response is 30Hz - 150Hz (-10dB), so the crossover frequency to Mid-Hi cabinets can be chosen strictly application-oriented between 80Hz and 140Hz. The cabinet is equipped with an electronic circuit called voice coil tracking protection. This circuit senses the terminal voltage of the transducer and simulates the thermal behaviour of the woofer´s voice coil. In case of potential thermal overload the power applied to the speaker is reduced to a safe level. Power amps up to 1200W/8Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The voice coil tracking protection exhibits “soft” switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value. The FX20-PRO cabinet is made of 15mm birch plywood. All corner joints and braces are grooved and glued. The cabinet has a heavy-duty structured lacquer surface and a solid-steel front grille matching the latest Dynacord enclosure design. The connector panel uses two 4-pole Speakon connectors (IN/OUT) for a safe connection and easy daisy-chaining to other cabinets. The pin assignment is 1+/1-. Pins 2+ and 2- are also connected between the respective two Speakon connectors. When using Dynacord power amp racks or system amplifiers, the whole system can be wired with 4-pole Speakon cables without any danger of accidental wiring mistakes. The cabinet is equipped with eight large rubber feet that allow easy stacking. Six handles and four heavy-duty castors on the rear side guarantee easy and safe transport.

Description Passive subwoofer, planar waveguide bass horn
Nominal impedance 8 Ω
Rated power RMS  600 W
Program power 1200 W
SPL 1 W/1 m 101 dB
Maximum SPL (1 meter) 132 dB
Frequency range (-10 dB), measured with Xa 4000 30–150 Hz
Recommended active crossover frequency 140 Hz, 18 dB/oct. Butterworth
Voice coil tracking protection Yes
Transducer EVX 180B
Audio Socket Models 2 x NEUTRIK speakON NL4MPR
Audio Socket Contacts 1+/1-
Enclosure material Birch plywood, 15 mm
Enclosure finish Heavy-duty structured lacquer
Color Black (RAL 9005, jet black)
Grille Powder coated steel with acoustic foam
Handles 6
Castors 4
Product dimensions (WxHxD) 610 x 905 x 814 mm
Net weight 54.3 kg
Shipping weight 60.5 kg
-------

XA4000

The universally usable Xa 4000 active 2-way power amplifier provides Class H technology and a switching power supply. Xa 4000 power amps combine outstanding audio performance, highest reliability and operational safety allowing easy setup and operation of active 2-way systems with a crossover frequency of 140Hz between bass and mid/high cabinets. The power ampfs output capacity of 1100W/4ohms for the bass channel and 900W/4ohms for the mid/high channel allows the connection of up to four 8ohms cabinets per channel. The integrated frequency crossover separates the bass from the mid/high range at 140Hz. The x-over is carried out as a modified Butterworth-crossover with a slope of 18dB/octave. The crossover frequency of 140Hz allows the connection of basically any mid/high and bass cabinet. Using 2-or 3-way fullrange speaker systems . for example DYNACORD F150 . as mid/high cabinets is possible as well. Individual dB-scaled level controls for SUB and TOP channels, which are carried out as recess-mounted detent potentiometers provide a control range between +6dB and .‡ allow combining bass and mid/high cabinets with quite different efficiency. The frequency response of the Xa 4000 particularly accounts for the requirements of .Liveg applications. An integrated Lo-Cut filter attenuates low-frequency signals such as rumble and subsonic noise protecting the bass cabinets from being damaged by mechanical overload.

Load Impedance / SUB 2 Ohms, 4 Ohms, 8 Ohms
Maximum Midband Output Power, THD = 1%, 80Hz SUB, 1kHz TOP, Single Channel
2 Ohms - 1800 W, 4 Ohms - 1100 W, 8 Ohms - 600 W
Rated Output Power, THD < 0.1%, 20 Hz-140 Hz SUB, 140 Hz-20 kHz TOP, THD < 0.1%, 20 Hz-140 Hz SUB, 140 Hz-20 kHz TOP, Single Channel
4 Ohms - 1000 W, 8 Ohms - 500 W
Load Impedance / TOP 2 Ohms, 4 Ohms, 8 Ohms
Maximum Midband Output Power, THD = 1%, 80Hz SUB, 1kHz TOP, Single Channel
2 Ohms - 1600 W, 4 Ohms - 900 W, 8 Ohms - 500 W
Rated Output Power, THD < 0.1%, 20 Hz-140 Hz SUB, 140 Hz-20 kHz TOP, THD < 0.1%, 20 Hz-140 Hz SUB, 140 Hz-20 kHz TOP, Single Channel 4 Ohms - 800 W, 8 Ohms - 400 W
Maximum RMS Voltage Swing, THD = 1%, 80Hz SUB, 1kHz TOP 78 V
Power Bandwith, TD = 1%, ref. 1kHz, half power @ 4 Ohms 10 Hz … 50 kHz
Voltage Gain ref.1kHz 37.3 dB
Input Sensitivity, at rated output power, 1kHz 0 dBu (0.775 V rms)
THD, at rated output power, MBW = 80kHz, 1kHz < 0.05%
Maximum Input Level +22 dBu (9.76 V rms)
Input Impedance, active balanced 20 kOhms
Damping Factor, 1kHz > 300
Slew Rate 30 V/µs
Signal to Noise Ratio Amplifier, A-weighted 102 dB
Output Stage Topology Class H
Power Requirements 240, 230, 220, 120V or 100V 50 Hz ... 60 Hz (factory configured)
Power Consumption, at 1/8 max. output power @ 4 Ohms 850 W
Protection Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn-on delay
Cooling Front-to-rear, 3-stage-fans
Ambient Temperature Limits +5°C … +40°C ( 40°F … 105°F)
Safety Class I
Dimensions (W x H x D), mm 483 x 88.1 x 384
Weight 8.25 kg (18.2 lbs)
Optional
Rear-rackmount 15,5” 112930 (RMS15-CL), Rear-rackmount 18” 112933 (RMS18-CL)
 
Product Reviews
What our customers say about this product
Customer Reviews (0)