 |
.jpg){kind=small} |
Due to the falling exchange rates the price of most Audio products have and may continue to increase, this is effecting all dealers not just us.
We are trying maintain our low prices for as long as we can.
Buy this one before they are all gone. £575 | DOWNLOADS
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
;){kind=small}
| Minimum Guaranteed Power, 1 kHz |
XTi 1000
|
XTi 2000
|
XTi 4000
|
XTi 6000
|
| Per channel, both channels driven | ||||
| Stereo, 2 ohms (per ch.) Stereo, 4 ohms (per ch.) Stereo, 8 ohms (per ch.) Bridge-Mono, 4 ohms Bridge-Mono, 8 ohms |
700W*
500W 275W 1400W* 1000W |
1000W*
800W 475W 2000W* 1600W |
1600W*
1200W 650W 3200W* 2400W |
3000W*
2100W 1200W 6000W* 4200W |
| With 0.5% THD. *With 1% THD |
||||
| Sensitivity (volts RMS) for full rated power at 4 ohms |
1.4V
|
| Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) |
+0/–1 dB
|
| Signal to Noise Ratio (below rated 1 kHz power at 8 ohms), A-weighted |
100 dB (103 dB in XTi 6000)
|
| Damping Factor (8 ohm): 20 Hz to 400 Hz |
> 500
|
| Input Stage |
Input is electronically balanced and employs
precision 1% resistors. |
| AC Line Current (120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch) |
XTi 1000: 6.8A, XTi 2000: 8.3A, XTi 4000: 10.5A; at idle draws no more than 30 watts.
XTi 6000: 15.3A; at idle draws no more than 180 watts. |
| Crosstalk (below rated power) 20 Hz to 1 kHz |
> 70 dB
|
| Input Impedance (nominal) |
20 kilohms balanced, 10 kilohms unbalanced
|
| Load impedance (note: safe with all types of loads) Stereo Bridge mono |
2-8 ohms (4-8 ohms in XTi 1000 A1 100V versions)
4-16 ohms (8-16 ohms in XTi 1000 A1 100V versions) |
| Voltage Gain (at 1 kHz, 8 ohm rated output) |
XTi 1000: 30.5 dB. XTi 2000: 32.9 dB. XTi 4000: 34.2 dB. XTi 6000: 37.1 dB.
|
| Maximum Input Signal |
+22 dBu typical
|
| Operating Temperature |
0° C to 40° C at 95% relative humidity
(non-condensing) |
| AC Line Voltage and Frequency Configurations Available (± 10%) |
100V, 120V, 220-240V 50/60 Hz
|
| Ventilation |
Flow-through ventilation from front to back
|
| Cooling |
Heat sinks and proportional-speed fan
|
| Dimensions: Width, Height, Depth (behind mounting surface) |
EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x12.25 in. (31.1cm) D
XTi 6000 is 16.2 in. (41.15 cm) D |
| Net Weight, Shipping Weight |
18.5 lb (8.4 kg), 21.5 lb (9.8 kg)
XTi 6000 is 24.0 lb (10.9 kg), 30.0 lb (13.6 kg) |
Amplifiers from Crown
 |
 |
 |
| Item code & description | Price | Order |
|
|
|
Pages
1
|