Dynacord Xa2-PRO L3600FD Professional PASystem EX DEMO
108
£ 11,899.00
RRP: £14999.00
Dynacord Xa2-PRO L3600FD System (EX DEMO) Dynacord XA2-PRO System is a quality professional plug and play PA system ideal for Bands, DJ and rental companies
Qty:
Sorry this item is out of stock

EX DEMO Bundle Includes

(This system is our EX DEMO stock and as such will have some marks and signs of use)

2 x L3600FD
2 x FX12-Pro
4 x FX20-Pro
6 x System Cables
1 x Case for amplifiers

---------

The XA2-PRO System is a professional tool for rental companies to solve tasks which address up to 1000 people or distances up to 50 meters in a very efficient way. Whether on a village fair, smaller open-air festivals, mobile DJ events or within a big marquee, the XA2-PRO is the ideal tool to serve variable applications in an efficient way to the greatest satisfaction of audiences and hosts. The whole system is set up and turn down with little effort and due to the casters it can be very easily transported. The high sensitivity of the transducers provides very high SPL combined with maximum operational safety. The XA2-PRO system’s main features – high sound pressure levels from compact enclosures, extremely convenient handling, and the ultimate sonic performance at a very reasonable price – will continue to be a benchmark. All cabinets have a new heavy-duty structured lacquer surface and a solid-steel front grille matching the latest Dynacord enclosure design.

XA2-PRO – L3600FD

The XA2-PRO – L3600FD System is a completely preconfigured, extremely powerful plug and play sound reinforcement system including a system controller. It consists of two L3600FD amplifiers with built-in controllers. Simply set it up, switch it on and off you go!

--------

FX12-PRO

The Dynacord FX12-PRO is a medium longthrow mid/high- frequency cabinet in coaxial design.
It can be used also without subwoofer cabinets in high-quality sound reinforcement system for speech for medium-throw distances. The recommended active x-over frequency is 140 Hz, 18 dB/oct. Butterworth. In the lo-mid range an ND 12 A Electro-Voice loudspeaker chassis works into a conical horn. The 80x40 Constant Directivity horn, driven by an Electro-Voice 1.4" ND 6 neodymium driver delivers the frequency range above 1kHz. The FX12-PRO is equipped with a passive x-over (1kHz, 18 dB/oct). Every transducer is protected against thermal overload with an electronic circuit called voice coil tracking protection. This circuit senses the terminal voltages of the transducers and simulates the thermal behaviour of the tranducers’ voice coils. In case of a potential thermal overload the power applied to the speakers is reduced to a safe level. Power amps up to 1200W 8 Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The voice coil tracking protection exhibits ‘soft’ switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.

Description
Passive mid-high speaker, coaxial conical horn
Nominal impedance 8 Ω
Rated power RMS 350 W
Program power 700 W
SPL 1 W/1 m 106 dB
Maximum SPL (1 meter) 134 dB
Frequency range (-10 dB), measured with Xa 4000 120–19000 Hz
Coverage angle nominal, 1 kHz, -6 dB (measured with Xa 4000) H 80° x V 40°
Crossover frequency 1000 Hz
Recommended active crossover frequency to subwoofer 140 Hz, 18 dB/oct. Butterworth
Voice coil tracking protection
Separate circuits for lo-mid and high
Transducer High frequency ND 6-8/CDH 8040-14
Transducer Low-mid frequency ND 12A
Audio sockets Model 2 x NEUTRIK speakON NL4MPR
Audio sockets Contacts “normal” 1+/1-
Audio sockets Contacts "system" 2+/2-
Enclosure material Birch plywood, 15 mm
Enclosure finish Heavy-duty structured lacquer
Color Black (RAL 9005, jet black)
Grille Powder coated steel with acoustic foam
Handles 2
Webbing strap point 2
Castors 4
Product dimensions (WxHxD) 600 x 610 x 814 mm
Net weight 49.5 kg
Shipping weight 54.6 kg
-------------------------

FX20-PRO

The Dynacord FX20-PRO is a Planar Waveguide Basshorn, equipped with the high-power Electro-Voice EVX 180B 18" transducer.
Frequency response is 30Hz - 150Hz (-10dB), so the crossover frequency to Mid-Hi cabinets can be chosen strictly application-oriented between 80Hz and 140Hz. The cabinet is equipped with an electronic circuit called voice coil tracking protection. This circuit senses the terminal voltage of the transducer and simulates the thermal behaviour of the woofer´s voice coil. In case of potential thermal overload the power applied to the speaker is reduced to a safe level. Power amps up to 1200W/8Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The voice coil tracking protection exhibits “soft” switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value. The FX20-PRO cabinet is made of 15mm birch plywood. All corner joints and braces are grooved and glued. The cabinet has a heavy-duty structured lacquer surface and a solid-steel front grille matching the latest Dynacord enclosure design. The connector panel uses two 4-pole Speakon connectors (IN/OUT) for a safe connection and easy daisy-chaining to other cabinets. The pin assignment is 1+/1-. Pins 2+ and 2- are also connected between the respective two Speakon connectors. When using Dynacord power amp racks or system amplifiers, the whole system can be wired with 4-pole Speakon cables without any danger of accidental wiring mistakes. The cabinet is equipped with eight large rubber feet that allow easy stacking. Six handles and four heavy-duty castors on the rear side guarantee easy and safe transport.

Description Passive subwoofer, planar waveguide bass horn
Nominal impedance 8 Ω
Rated power RMS  600 W
Program power 1200 W
SPL 1 W/1 m 101 dB
Maximum SPL (1 meter) 132 dB
Frequency range (-10 dB), measured with Xa 4000 30–150 Hz
Recommended active crossover frequency 140 Hz, 18 dB/oct. Butterworth
Voice coil tracking protection Yes
Transducer EVX 180B
Audio Socket Models 2 x NEUTRIK speakON NL4MPR
Audio Socket Contacts 1+/1-
Enclosure material Birch plywood, 15 mm
Enclosure finish Heavy-duty structured lacquer
Color Black (RAL 9005, jet black)
Grille Powder coated steel with acoustic foam
Handles 6
Castors 4
Product dimensions (WxHxD) 610 x 905 x 814 mm
Net weight 54.3 kg
Shipping weight 60.5 kg
-------

L3600FD

DSP Power Amplifier 2x1800W

  • Live performance DSP amplifier
  • Fully integrated professional speaker processing with FIR Drive technology
  • Market leading acoustic performance and rock solid reliability
  • True 2 ohm stability
  • Intuitive system control software, makes setup and control easy
Load Impedance 2Ω 2.7Ω 4Ω 8Ω
Maximum Output Power, SIngle Channel 2Ω: 3200W; 2.7Ω: 2700W; 4Ω: 1800W; 8Ω: 950W
Maximum Output Power, Dual Channel 2Ω: 3000W; 2.7Ω: 2500W; 4Ω: 1700W; 8Ω: 900W
Maximum Output Power, Bridged 4Ω: 6000W; 8Ω: 3400W
Maximum RMS Voltage Swing, THD = 1%, 1kHz 90.6V
Voltage Gain ref.1kHz 32.0dB
IMD-SMPTE, 60 Hz, 7 kHz <0.1%
DIM 30 <0.05% (3.15 kHz, 15 kHz)
Maximum Input Level +21dBu
Crosstalk < -80dB (ref. 1 kHz, at 100 W/4 Ω)
Frequency Response 10 Hz to 21 kHz (±1 dB)
Input Impedance, active balanced 20kΩ
Signal-to-Noise Ratio (A-weighted) >109dB
Output Noise , A-weighted <-68dBu
Output Stage Topology Class H
Power Requirement 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption 850 W (⅛ Maximum Output Power @4Ω)
Protection Audio limiters, high temperature, DC, HF; Back-EMF, Peak current limiters, Inrush current; limiters, Turn on delay
Cooling Front-to-rear, 3-stage-fans
Safety Class I
Available Color Black
Height 88mm (3.46")
Width 483mm (19.02")
Depth 462.4mm (18.2")
Weight Net 18.2kg (40.12 lbs)
Signal Processing FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance
Mains Fuse 240 V/230 V: T15AH; 120 V/100 V: T30AH
Operating Temperature Range +5°C to +40°C (40°F to +105°F)
Total Harmonic Distortion <0.05% (1200 W/4 Ω MBW = 80 kHz, 1 kHz)
Related Products
midas m32 digital live sound mixing console
Midas M32 Digital Live Sound Mixing console Legendary MIDAS sound quality
£3,179.00
Product Reviews
What our customers say about this product
Customer Reviews (0)